Showing posts with label water meter test bench. Show all posts
Showing posts with label water meter test bench. Show all posts

Sunday, October 20, 2019

Flow Meter Calibration system


Flowmeter calibration can be divided into four sections, namely level, liquid, gas & mobile flow calibration meters.

Level calibrations use Electrical / Electronic and Pneumatic Consoles are housed in a sleek Panel / Test Bench Rack, designed ergonomically; a stand-alone Hydro (Water) Intensifier Unit caters to Pressure Tests. With Built-in Intelligent Software (with the facility of Retrieving / Recording / Interpreting & Displaying the Readings / Values received from various Test and Standard Instruments in easily understandable/user-friendly format) is provided for generation of Calibration Certificate / Chart / Report.
 Types of level Instruments –best Suited for
Tests that can be performed
                               Float type level instruments
                            Linearity
                               Displacer
                            Dead band
                               Radar
                           Sensitivity & Resolution
                               Capacitance
                            Pressure test
                               Ultrasonic
                            Hysteresis
                               Magnetic
                            Repeatability
                            Built-in & External chamber
                            Functional
.
Nagmanflow’s Water meter calibration system is most suited for verifying / Calibrating – Domestic Water Meters of Sizes from DN 15 to DN 50 and Bulk/Industrial meters of Sizes above DN 50 up to DN 300.
Complete Integrated System with Pumps (with VFD), Rotameters or Flow meters / Manual or Automatic Throttles for Flow Rate Control. Reservoir, Test Bed with Quick Clamping Systems / Spacers & Blanks and Electric Control Console / Calibration Software.
Boon to Water Boards / Jal Nigam / Municipal Corporations / OEMs & Calibration Labs
Best Suited for Single JET, Multi Jet, Electromagnetic and Ultrasonic water meters covering AMI / AMR features.
Nagmans gas Calibration Standard’ of the Test Bench is “Bell Prover”, which is considered a Primary (Calibration) Standard to Test & Calibrate Domestic Gas Meters (& Gas Meters used in Hotels/Restaurants etc.). The device is ideal for OEMs, Calibration Laboratories & Calibration Service Providers.
The Test Bench, with 2 Sizes of Bell Prover (20L & 100L)will effectively cover Very Low (Qmin – typically 0.016 m3/h (0.27 LPM)) to Maximum (Qmax – 6 m3/h (100 LPM)) Flow Rates. Available Accuracies : 0.2% & 0.5% F.S.
Upto 4 Gas Meters can be connected (inserted) during a campaign. Facility provided for continuously monitoring Differential Pressures (DP) across each Meter as well as upstream & downstream Line Pressures & Line Temperatures. Line Pressures are regulated typically around 500Pa.
Nagman’s BELL PROVER

Bell prover helps the gas flow meter test bench to sample and calibrate the gas flow. It can test rota meter, gas meter, and other forms of a gas flow meter. The bell prover can move up and down automatically and the gas-output valve can switch automatically.
The Bell prover and liquid cell form a sealed space of variable volume. When the Bell moves down into the sealed liquid, through pressure compensation mechanism, the internal gas pressure does not vary along with the changed depth of the sealed liquid. Meanwhile, the gas in the Bell is exhausted to the flow meters through a connect pipe. The exhausted gas volume will be detected compared with the cumulative in the meters.
Sizes
  G 1.6 to 6
Working pressure
  1 KPa to 5 KPa
Flow range
  0.2 m3 / hr. to 120 M3/hr
Accuracy
  0.2 to 0.2%

Nagmanflow’s Sonic Nozzle

A “sonic nozzle” (also known as “Critical Flow Venturi” or “Critical Flow Nozzle”) is a flow meter that can be used as a calibration standard for gas flow meters or any flow measurement device. By design, sonic nozzles are a constant volumetric flow meter.
The nozzles are designed and manufactured to the ISO standard and as such the gas is accelerated along the Bell Mouth converging section and then is expanded in a conical diverging section, which is designed for pressure recovery. In the throat or minimum area point of the Sonic Nozzle, the gas velocity becomes equal to the speed of sound. At this point, gas velocity and density are maximized, and the mass flow rate is a function of the inlet pressure, inlet temperature, and the type of gas. So, you only need to measure the inlet pressure and temperature to determine the flow rate.


Monday, September 16, 2019

The Features of Water Meter Test Bench


Nagmanflow is a part of Nagman consortium, a Pan India company expertise in supplying flow meter and measure technology Instruments to the global market since 1972. The company is ISO certified and accredited to NABL industry standards.

The water meter test bench Instruments from Nagman features with WATCAL SERIES (WATER CALIBRATION SYSTEM). Designed to meet the ISO 4064/3, OMIL R-49 Industry standards, Nagman’s water meter calibration and bench test system are designed to meet efficiency, versatile performance for multipurpose readings, cost effective and optimal.



The salient features about Nagmanflow water meter calibration system are that it’s designed to meet customized needs in the global market as per Industrial requirements. All these customized solutions are engineered with solid scientific way of measures, to produce accuracy in measurements.

Those are namely

  • Through Comparison – Master/Slave – Method - Pre-calibrated Electromagnetic Flow Meter Masters.
  •  Through Gravimetric Method – employing 1 or more SS Collection Tanks mounted on Precise Weighing Scales.
  •  Through Volumetric Method – employing 2 or more Pre-calibrated Stainless Steel Volumetric Tanks (Low Volumes).
  •  Complete Integrated System with Pumps (with VFD), Rotameters / Manual Throttles for Flow Rate Control. Reservoir, Test Bed with Quick Clamping Systems / Spacers & Blanks and Electric Control Console / Calibration Software.
  •  Boon to Water Boards / Jal Nigam / Municipal Corporations / OEMs & Calibration Labs


These well-thought engineering designs from Nagman, suit domestic, industrial, bulk measurements in all related engineering divisions of flow (Mechanical, electrical and Ultrasonic). Water meter test bench is available in the range between DN 10 to DN 40 to DN 300, in low, medium & high. The test bench for water meter is designed to measure flow rates from 1 LPM TO 335 LPM for domestic purposes and 10 LPM to 1500 MH/hr for Industrial purposes.

The multiple Rotameters and electromagnetic flowmeters are enhanced to meet precise measurements in water meter test bench, which includes damping tanks, spacers’ controllers and VFD’S to support the measuring machine in the instrument system.