Showing posts with label ultrasonic flow meters. Show all posts
Showing posts with label ultrasonic flow meters. Show all posts

Tuesday, January 19, 2021

Ultrasonic Flow Meters From Nagmanflow

 Ultrasonic flow meters use sound waves to define the velocity of a fluid flowing in a pipe. At no flow conditions, the frequencies of an ultrasonic wave diffused into a pipe and its replications from the fluid are the same. Under flowing conditions, the frequency of the replicated wave is different due to the Doppler Effect. When the fluid moves faster, the frequency shift surges linearly. The transmitter routes signals from the transmitted wave and its reflections to regulate the flow rate.

The ultrasonic flow meters send and receive ultrasonic waves amid transducers in both the upstream and downstream ways in the pipe. At no flow circumstances, it takes the same time to travel upstream and downstream amongst the transducers. In flowing settings, the upstream wave will move gentler and take more time than the downstream wave. When the fluid moves faster, the variance between the upstream and downstream times rises.

Ultrasonic flow meters are usually applied to measure the velocity of liquids that permit ultrasonic waves to pass, such as water, molten sulfur, cryogenic liquids, and chemicals. Transit time designs are also accessible to measure gas and vapor flow. Since fluids that do not pass ultrasonic energy, such as many types of slurry, restrict the penetration of ultrasonic waves into the fluid. In ultrasonic flowmeters, opaque fluids can restrict ultrasonic wave diffusion too near the pipe wall, which can reduce accuracy and make the flowmeter to measure wrongly. The ultrasonic flowmeters can stop functioning when an opaque fluid declines the ultrasonic wave to such a level that the wave does not touch the receiver.

 Be sure that the fluid can sufficiently conduct ultrasonic waves, since the flow measurements will not quantity when the ultrasonic waves cannot pierce the flow stream between the transducers. Likewise, ultrasonic waves must be able to infiltrate the fluid for Doppler flowmeters to operate perfectly. While the fluid is moderately opaque and does not enter the fluid, the flowmeters tend to quantity the velocity of the fluid at or near the pipe wall, which can cause substantial measurement error and cause the flowmeter to fail.

Monday, January 6, 2020

Types Of Level Transmitters From Nagmanflow

Level Transmitters

Nagman calibration LLC a unit of Nagman Instruments PVT ltd is the first calibration laboratory in India to be accredited with ISO/IEC 17025 standards and NABL empanelled auditors & quality control Inspectors with ISO9001/14001for total calibration solutions. Nagman calibration labs in Chennai & Mumbai covers all scientific parameters like Thermoelectric, Mechanical (Pressure, vacuum, flow, temperature, level, mass, dimension and volume) & fluid flow (Process flow meter & water calibration meter). The centres are also equipped with sophisticated calibration equipment and computerized automated calibration reporting of primary/secondary transfers of data.  

Flow meter calibration can be divided into four sections, namely LEVEL, liquid, gas & mobile flow calibration meters.
LEVEL calibrations use Electrical / Electronic and Pneumatic Consoles are housed in a sleek Panel / Test Bench Rack, designed ergonomically; a stand-alone Hydro (Water) Intensifier Unit caters to Pressure Tests. With Built-in Intelligent Software (with the facility of Retrieving / Recording / Interpreting & Displaying the Readings / Values received from various Test and Standard Instruments in easily understandable/user-friendly format) is provided for generation of Calibration Certificate / Chart / Report.
Nagmanflow’s Types of Level Calibrators
Nagman’s Radar Level Transmitter – NAGLEV 6G Series
Operates with the antenna system in principle of microwave transmitted signal with a short pulse, high frequency & resolution. The measurement time which is quick makes this a known for accurate measurement in Industrial circle. Even in complex & critical conditions these Radar level transmitters use false echoes with embedded software connected to the sensor, for processing & debugging the level accurately.
Nagman has six types of Radar level transmitting meters, namely QTRD 801 to 806. All these have a measurement precision of ± 10mm, with a temperature range from -40 to 400 degree Celsius. The main aspects that differentiate these radar level transmitters are the scientific proprieties in Industrial scale-like corrosive both light & high, pressure variance, and solid, sticky, viscous, dielectric & mixed liquid/temperature mediums.
Nagman’s all radar level transmitters are intrinsically safe with EXIAICC T6Ga flameproof quality standards and made with stainless steel body/Aluminum shell protection cover.
Nagman’s Radar Level Transmitter – NAGLEV 2G Series
Operates with the same principle of 6G series but has more potential radar sensor with high frequency and embedded with new fast microprocessors to the antenna for accurate readings. Nagman’s 2G series is resilient to all sorts of external turbulences such as pollution, corrosion, temperature/pressure distortions.
Nagman’s 2G Radar level transmitting meter models are HTRD 601 to 906 series, with measuring range up to 70 meters, Accuracy range from:±3 to:±15mm in models, the Temperature range of -40 to -250 degree Celsius & process pressure of 0.1 to 0.4 MPA. 
Both handheld and mounted models are available as per requirements with fixed with LCD display. Installation methods and techniques can be referred through Nagman’s catalogues.
NAGLEV Series GWR
Nagman’s Guided Wave Radar meter operates in the principle of Reflected pulse signal along the cable or rod probe-type transmit to the instrument electronic circuit parts, the microprocessor processes the signal, identify the microwave pulse-echo generated in the material surface. Correct identification of the echo signal have completed the implementation by the pulse software.
Nagman’s guided wave radar meter has five models from gwr 701 to 705, with measuring range from 6 to 30 meters based on models, the precision of ± 10mm, Frequency of 500 MHZ to 1.8GHZ & a wide temperature range of -40 to 400 degree Celsius.
Nagman’s Ultrasonic Level Transmitter – NAGLEV Series US
Operates on the principle of; sensor of the meter pulses in the direction of the product surface. There, they are reflected back and received by the sensor. The meter measures the time t between pulse transmission and reception. The meter uses the time t (and the velocity of sound) to calculate the distance D between the sensor membrane and the product surface. In gas mediums the ultrasonic velocity of the gas is influenced by the gas temperature, so the material level meter compensates sound velocity for the gas temperature at work.
Product Introduction Model Parameters US 4 US 6 US 8 US 10 US 12 US 20 US 30 Application Industrial Level Measurement Measuring Range liquid:0.2-4 m liquid:0.25-6 m liquid:0.3-8 m liquid:0.4-1 0m liquid:0.5-12 m liquid:0.8-20 m liquid:1.2-30 m Process Connection G2 Thread M95X2.0Thread Energy Transducer Material ABS,PVC,PTFE Temperature -40~ 75 Deg C (LCD:-20ºC~ +70ºC) Temperature compensation The whole range with automatic compensation Process Pressure ±0.1MPa Precision 0.2% of actual range Signal output 4-20mA(Option: RS485 / HART/ Alarm) Power Supply DC20V~32 ≥30mA Display Resolution Ratio 1mm Mode of Indication 4 Digit LCD Cable Diameter Ø 6-12mm Single Wire Diameter Ø 0.5-1.78mm Cable Entry/Seal M20/PG13.5 Beam Angle 8º(3db) Measurement Cycle 1.5 seconds.
Features are Integrated design, installed conveniently; Protected in the excessive voltage and current, protected in the thunder and lightning. The big show window of LCD is easy to debug and observe;  Over-voltage over-current protection, lightning protection;  Advanced since the clamp type terminal, to ensure that wiring never loose;  Intellectual signal treatment technology, guarantee that the instrument meets various kinds of operating occasion;  All plastic probe, acid and alkali resistant, adapt to bad environment.

Friday, November 22, 2019

Why is Ultrasonic flow meters becoming a favourite choice in the Industry?

Ultrasonic Flow Meters

 The Ultrasonic flow meters operate on the principle of Ultrasonic sound waves when passed through a flow pipe, determining the velocity of the fluid in it. When there is no flow in the pipe, the frequency of the ultrasonic sound waves gives out the same input frequency. When there is a flow inside the pipe, the frequency of the Ultrasonic flow meters increase in response with the speed of flow in Linear.

Nagman Instruments a pan India Company since 1972, with global supply, is a pioneer in Instrumentation & calibration systems. The company with its five types of flow meters that operates on by principles, has introduced a versatile Ultrasonic flow meter that can be used in various industrial applications. Nagman Ultrasonic flow meter comes with a wall mounted & handheld with three types of sensors S2, L2 & M2 that can be fitted with purpose applications. Virtually supports all sorts of fluid and liquid flow in Industrial applications. Interfaced through RS 232 communication mode; it comes with a 7 digit totals for positive and negative flow. Nagman Ultrasonic flow meter has a temperature range of -10 to 160 deg Celcius, Sound accuracy of  ±1% of Reading at rates > 0.2 mps, velocity of 0 to 10m/s.


Why is Ultrasonic flow meters becoming a favourite choice in the Industry?

Ultrasonic flow metres when compared to other types based on their principles of working, has its own salient features.
-          Ultrasonic flow meters have less connected parts or in other words devoid of internal design complexity.
-          Its working principle just depends on a beam of sound waves passed through the pipe medium which makes it a precise and accurate measuring in flow meters.
-          The frequency variation does not distort or trouble the flow of fluid in pipes, as it just a sound wave passing through or transmitted across the medium.
-          Ultrasonic flow meters are versatile with wall-mounted and handheld options in AC/DC supply.

  Flow meter hire is the same ultrasonic flow meter with hiring (use & return) option. The Instrument, when required for a short period time in measuring flow in pipes in certain critical & remote applications, can make use of the flow meter hire. Not all industrial applications are in the house in piping and flow. Many applications are external in offshore and onshore with pipelines. So Ultrasonic flow meter hire options enhances the safety and reliability of piping systems in those areas, with its accurate and steady working principle.