Showing posts with label flow measurement. Show all posts
Showing posts with label flow measurement. Show all posts

Friday, June 4, 2021

Exactly how to Calibrate a Flowmeter?



A flowmeter is a tool that is used to measure the flow rate of a gas or fluid and then shows the flow reading to the instrument operator by means of an indicator, either analog or digital output. In general, flowmeters offer vital measurement data to industry types, from pharmaceutical to Oil & Gas. The flowmeter types used here refer to closed pipe type flowmeters and not open channel systems. The flow rate denotes the average velocity at which a gas or fluid moves through the pipe. To guarantee the flow meter indicates or outputs a reliable and precise reading, the flowmeter must be calibrated consistently.

What is Flow Meter Calibration?

Calibration is the procedure of checking an instrument to check it is correct. Flowmeter calibration is the same method where the measurement is flow. Calibration of a flowmeter can be attained in one of the numerous ways, but generally includes the comparison of the flowmeter against a reference standard of higher precision. Calibration is a crucial part of an instrumentation system to promise a line of traceability of the measurement system is maintained. To understand the flowmeter performance over a period of time, flowmeter calibration must always be conducted on an “As Found” basis so meter drift analysis can be measured. With additional customer agreement, a further adjustment of the flow meter reading may be performed to reduce the flowmeter errors.

Flowmeter Calibration Processes?

We describe the various flowmeter methods and procedures associated with liquid flowmeters. Then will discuss the calibration methods for air and gas flowmeters. Liquid flow calibration can be done in numerous ways, but always includes the comparison against a standard, this may be a primary or secondary reference standard, dependent upon the precision required. The three central calibration principles for the Process flow meter calibration system use Gravimetric, Volume or transfer standard calibration methods. 

Tuesday, May 18, 2021

Flow Meters and Measurements From Nagmanflow

 As technology advances and new industries are industrialized, the need for precise and detailed measurements only increases. Liquid flow meters are one such ground-breaking tool created to meet this need. The Non-stop development of these instruments has served the advancement of many diverse industries and an ever-increasing variety of applications and flow measurements.

Flow Meter


According to its name, flow meters measure liquid or gas flow through a pipe and its rate of change. Various types exist with changing construction to help a wide range of purposes; though, each is built to the best likely fluid dynamic principles. Important technical features and type of meter used commonly depend on the viscosity, temperature, etc.

Today, flow meters have flagged themselves as essential instruments used in many diverse industries. Some of these industries are:

  • Ø Fuel and Oil
  • Ø Petrochemical
  • Ø Chemical
  • Ø Pharmaceutical
  • Ø Paints, Grease, and Coating
  • Ø Food and Beverages

Other than for industry use, liquid flow meters are utilized for educational purposes in university science and engineering programs. They are also used in housing projects to determine the amount of water utilized.

Engineers have created liquid flow meters that can withstand extreme conditions such as outdoor temperature and pressure; irrespective of the weather conditions, we have developed meters that give exact results. Control valves are frequently used in conjunction with these instruments for the extended application of directing the fluid and regularizing velocity, hence maintaining the required pressure level.

The use of liquid flow meters has usage outside of measurements, such as helping to control the velocity of a fluid and its use. They can also save water from being wasted by spotting leakage in pipes.

Saturday, October 24, 2020

Positive Displacement Flow Meters From Nagman Flow

Positive Displacement flow meters are the best flow measuring equipment to openly measure the volume of fluid that travels through the flow meter. It attains this by trapping pockets of fluid amongst rotating components housed inside a high precision chamber. This can be associated to recurrently filling a beaker with fluid and pouring the contents downstream while calculating the number of times the beaker is filled. Rotor rotational velocity is directly related to flow rate since the flow of fluid is instigating the rotation.




 

 In the case of electro magnetic flow meters, the rotating components involve magnets that trigger numerous sensor options located exterior to the fluid chamber. Mechanical positive shift flow sensors rely on the rotation to drive either a magnetic coupling or a direct gear train related to the mechanical counter.

 

 Positive Displacement flow meters do not gratify a power supply for their operation and do not need straight upstream and downstream pipe runs for their setting up. Positive displacement flow meters are obtainable in sizes from in to 12 in and can function with turndowns as great as 100:1, although ranges of 15:1 or lower are much more communal. The slippage between the flow meter constituents is reduced and metering precision is consequently increased as the thickness of the process fluid increases.

 

 The process fluid must be spotless. Particles greater than 100 microns in size must be detached by filtering. PD meters work with small clearances amid their precision-machined parts which worn out speedily and rescind their accuracy. For this reason, Positive Displacement flow meters are generally not suggested for measuring slurries or coarse fluids. In fresh fluid services, nevertheless, their precision and wide rangeability make them perfect for custody transfer and group charging. They are most extensively used as household water meters. Millions of such units are formed annually. In industrial and petrochemical applications, Positive displacement flow sensors are normally used for batch charging of both liquids and gases.

 

 While slippage through the positive displacement flow meters declines that is, correctness increases as fluid viscosity increases, the pressure drop through the meter also increases. Subsequently, the maximum and minimum flow capacity of the flow meter is reduced as viscosity surges. The greater the viscosity, the less slippage and the lesser the measurable flow rate becomes. 


Tuesday, September 15, 2020

Nagmanflow's Flow Meters and the complete study

         A flow meters is a device used to calculate the linear, the nonlinear, mass and volumetric flow rate of a fluid or a gas. When selecting the flow meters, one ought to think about such subtle factors as expertise of plant personnel, their knowledge with calibration and maintenance, spare parts accessibility, and meantime linking failure history, etc., at the particular plant site. It is also suggested that the cost of the installation be calculated only after taking these steps.




     One of the most general flow measurement mistakes is the reverse of this sequence: instead of picking a sensor which will execute correctly, an effort is made to justify the use of a device since it is less expensive. Those "inexpensive" purchases can be the most expensive installations. This blog will help you comprehend flow meters, and you can also converse to our application engineers at any time if you have any particular flow measurement challenges.

  

        The primary step in flow sensor variety is to resolve if the flow rate information should be constant or totalized and should consider if this information is required locally or remotely. If a little, how should the transmission be? Should the transmission be analogue, digital, or shared? And, if shared, what should be the minimum data-update frequency. And if an answer is derived from the question, an assessment of the properties and flow uniqueness of the process liquid, and of the piping that will house the flow meter, must take place. To come up to this task in a methodical manner, forms have been developed, so that the following types of data are entered for each application.

  


 

 

    The fluid and its specified pressure, temperature, permissible pressure drop, density, conductivity, viscosity and vapour pressure at highest operating temperature are listed, jointly with a suggestion of how these properties might vary or interact. In toting up, all security or toxicity levels should be provided, collectively with exhaustive data on the fluid's composition, presence of bubbles, solids, tendency to coat, and light transmission qualities.

 

    Probable minimum and maximum pressure and temperature values must be given in adding to the usual operating values whilst choosing flow meters. Can the flow reverse, will it always fill the pipe, does the slug flow can develop air-solids-liquid, if aeration or pulsation is probable, can the sudden temperature changes can happen, or only particular precautions are required throughout cleaning and maintenance, these particulars, too, should be confirmed.


       Regarding the piping and the region where the flow meters are to be located, consider: For the piping, its course must avoid downhill flow in liquid applications, size, material, and schedule. The engineer ought to identify if vibration or magnetic fields are present or likely in the area if electric or pneumatic power exists, if the spot is classified for explosion hazards, or if there are previous exceptional requirements such as observance with sanitary or clean-in-place (CIP) regulations.

Friday, November 22, 2019

Why is Ultrasonic flow meters becoming a favourite choice in the Industry?

Ultrasonic Flow Meters

 The Ultrasonic flow meters operate on the principle of Ultrasonic sound waves when passed through a flow pipe, determining the velocity of the fluid in it. When there is no flow in the pipe, the frequency of the ultrasonic sound waves gives out the same input frequency. When there is a flow inside the pipe, the frequency of the Ultrasonic flow meters increase in response with the speed of flow in Linear.

Nagman Instruments a pan India Company since 1972, with global supply, is a pioneer in Instrumentation & calibration systems. The company with its five types of flow meters that operates on by principles, has introduced a versatile Ultrasonic flow meter that can be used in various industrial applications. Nagman Ultrasonic flow meter comes with a wall mounted & handheld with three types of sensors S2, L2 & M2 that can be fitted with purpose applications. Virtually supports all sorts of fluid and liquid flow in Industrial applications. Interfaced through RS 232 communication mode; it comes with a 7 digit totals for positive and negative flow. Nagman Ultrasonic flow meter has a temperature range of -10 to 160 deg Celcius, Sound accuracy of  ±1% of Reading at rates > 0.2 mps, velocity of 0 to 10m/s.


Why is Ultrasonic flow meters becoming a favourite choice in the Industry?

Ultrasonic flow metres when compared to other types based on their principles of working, has its own salient features.
-          Ultrasonic flow meters have less connected parts or in other words devoid of internal design complexity.
-          Its working principle just depends on a beam of sound waves passed through the pipe medium which makes it a precise and accurate measuring in flow meters.
-          The frequency variation does not distort or trouble the flow of fluid in pipes, as it just a sound wave passing through or transmitted across the medium.
-          Ultrasonic flow meters are versatile with wall-mounted and handheld options in AC/DC supply.

  Flow meter hire is the same ultrasonic flow meter with hiring (use & return) option. The Instrument, when required for a short period time in measuring flow in pipes in certain critical & remote applications, can make use of the flow meter hire. Not all industrial applications are in the house in piping and flow. Many applications are external in offshore and onshore with pipelines. So Ultrasonic flow meter hire options enhances the safety and reliability of piping systems in those areas, with its accurate and steady working principle.